Joseph A. Hull; A. Glenn Hanson; L. R. Bloom
Abstract: A review of EIA and CCITT data interface standards identifies three generations namely: first (1960's), second (1970's), and third (1980's and beyond). The User/Network physical interference for the pending Integrated Services Digital Network is an example of third-generation standard. Wideband channel requirements under discussion by the CCITT will be limited by transmission media in the implementation of future interchange circuits. Conventional wire pairs and coaxial cables used in such interchange circuits are limited in the transmission rate and distance combinations by pulse distortion.
A figure of merit applicable to coaxial cable, wire pairs, and optical fiber waveguides is derived, based on physical and geometric properties. The distortion-limiting performance characterization of representative examples of the different media is presented. A recent survey of U.S. manufacturers' off-the-shelf optical fiber digital links is summarized to show evidence of viability for high–bit–rate, medium-distance interchange circuits.
Keywords: ANSI, CCITT, coaxial cable, Common Physical Interface, digital transmission lines, DTE/DCE interface, EIA, fiber optics, impulse response, Integrated Services Digital Network, ISDN User Network Interface, optical fiber
Keywords: impulse response; Integrated Services Digital Network (ISDN); telecommunication standards; CCITT; ANSI; coaxial cable; Common Physical Interface; digital transmission lines; DTE/DCE interface; EIA; fiber optics; ISDN User Network Interface; optical fiber waveguide
To request a reprint of this report, contact:
Lilli Segre, Publications Officer
Institute for Telecommunication Sciences
Disclaimer: Certain commercial equipment, components, and software may be identified in this report to specify adequately the technical aspects of the reported results. In no case does such identification imply recommendation or endorsement by the National Telecommunications and Information Administration, nor does it imply that the equipment or software identified is necessarily the best available for the particular application or uses.
Back to Search Results